xSP Client Setup Quick Start (if using CMon)

Client Setup Quick Start (if using CMon)

NovaBACKUP xSP / Remote Workforce

Last Updated: Dec 13, 2017 02:57PM PST

The following are the quick steps to create a user account and setting it up to backup to your storage server. This article assumes the following:

• The Storage Server is Installed and accessible from the client machine.

• If you are not using an xSP or Remote Workforce storage server, please disregard this part.
• You have a valid license activated in the Configuration Manager (a trial license is OK).
• A storage location is configured in the Storage tab of the Configuration Manager.

• The CMon (Central Monitoring Console) software is installed and accessible from the client machine.

• You have tested that you can log into the CMon.

Step 1: Create the User Account on the Storage Server

1. Connect to your Storage Server.
2. Open the Configuration Manager.
3. Click the [Add] button to add a new user account.
4. Enter the account username and password.
5. Select the primary storage location from the drop down.
6. Click [OK].

Step 2: Install the Client software

1. Download or copy the client installation application to the machine to be backed up.
2. Run the installation.
3. Select the Typical installation option unless you wish to modify the installation location or installed components
4. Select the Advanced mode startup option.
5. Allow the application to complete the installation.

Step 3: Configure the Online Storage Device in the Client Software

1. Open the NovaBACKUP xSP client software
2. Click on the Device tab
3. Click [Add]
4. Enter the IP/URL of the Storage Server
5. Enter the User Account Name and Password for the account you setup
6. Click [Test Connection], if successful, click [OK]

Step 4: Connect the Client to the CMon (Central Monitoring Console)

1. With the client application still open, click the Home tab
2. Click Settings > Default Settings
3. Select the CMon Server tab
4. Enter the Server name (IP or URL) for the CMon Server (Central Monitoring Console)
5. Click [OK]
6. Exit the NovaBACKUP xSP client application

Step 5: Start the CMon Agent Service on the client

1. In Windows, click on Start > Run
2. Type services.msc
3. Press [Enter]
4. Locate the service named "Backup Client Agent Service" in the list of services
5. Right click on the service and choose Properties
6. Set the "Startup Type" = Automatic (Delayed Start)
7. Click OK to save the change.
8. Right click on the service and click the [Start] button
9. Close the Services window

When you have finished, you should be able to:

• See the agent in the CMon
• Create a backup job, setting the Online Storage device as the destination, through the backup client
• Start a backup job using the backup client
• Verify that a backup job has completed in the CMon

See how much data is in storage for that user account in the Storage Server Configuration Manager.