ISO to USB (Rufus & PenDriveLinux)

You will need to generate an ISO of the Boot disk environment using either Simple or Advanced mode in the Image Backup section of the Software before continuing.

• Create a recovery boot disc in Simple Mode
• Create a recovery boot disc in Advanced mode (with ADK instructions)

To create a bootable USB drive from the ISO file you will need to use a utility such as Rufus or PenDriveLinux (both are free): 

https://rufus.akeo.ie/

https://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ 

To use PenDriveLinux Universal USB Installer (UUI): 

1. Download the file using the above direct link and run it, 
   • it will look like a setup file, but doesn't install anything on your machine
2. Once the interface is open, confirm the license agreement and click next
3. Select "Windows 10 Installer" from the top drop-down list 
4. Use the second box to [Browse] to the .ISO file

   • default path: C:\ProgramData\TempDR\DRBackup{8 character hex}\DRBoot.iso

5. Select the destination USB flash drive
6. Select the option to "Format" the selected flash drive (Erases Content)
7. Select [Create]